A step by step guide for turning on, shutting down or restarting your inverter safely.

To Turn On
Step 1: Locate your meterbox or switchboard and locate the "main switch inverter supply" and turn that to the ON position.

Step2: Go to your inverter and locate the DC isolator. (Some times there will be a DC isolator to the LEFT of the inverter, most of the time it will be an inbuilt switch on the bottom of the inverter or sometimes both.) Make sure all DC isolators are turned ON. 

To Shut Down
Step 1: Locate your meterbox or switchboard and locate the "main switch inverter supply" and turn that to the OFF position.

Step 2: Go to your inverter and locate the DC isolator. (Some times there will be a DC isolator to the LEFT of the inverter, most of the time it will be an inbuilt switch on the bottom of the inverter or sometimes both.) Make sure all DC isolators are turned OFF. 

To RESTART the inverter, carry out the OFF and ON procedures explained above. Once you have shut down the inverter, check the screen and wait for lights to turn off and for the screen to turn blank. Then you can turn the inverter back ON. 

If you are restarting your inverter because of a fault, and the fault is persisting, please contact your Nectr Solar & Battery or installer for further assistance.